Mineral Oil
Mineral Oil
Mineral Oil is a liquid derived from petroleum, composed of hydrocarbons, and is used in a variety of industrial applications, including lubricants, solvents, and cosmetic products, depending on the degree of refinement and purification required.
We present the following variants:
⦁ Naphtenic Rubber Oil
⦁ Common Rubber Oil
⦁ Industrial White Oil
⦁ Base Oil
⦁ Cosmetic White Oil
⦁ Aromatic Mineral Oil
High Grade Naphthenic Oil
| Type | Kinematic Viscosity (40℃) mm²/s | Kinematic Viscosity (100℃) mm²/s | Density (20℃) kg/m³ | Flash Point ℃ | Pour Point ℃ |
|---|---|---|---|---|---|
| KN4006 | 54.28 | 6.242 | 897.6 | 190 | -30 |
| KN4010 | 172.9 | 10.51 | 901.4 | 218 | -21 |
| KNH4008 | 104.7 | 9.218 | 883.4 | 208 | -26 |
| N4016 | 406.6 | 16.75 | 907.3 | 221 | -13 |
Common Grade Rubber Oil
| Type | Kinematic Viscosity (40℃) mm²/s | Kinematic Viscosity (100℃) mm²/s | Density (20℃) kg/m³ | Flash Point ℃ | Pour Point ℃ |
|---|---|---|---|---|---|
| KG06 | 51.33 | 5.643 | 879.6 | 190 | -38 |
| KG12 | 164.3 | 10.52 | 915.4 | 226 | -25 |
| K10B | 188.46 | 9.907 | 919.4 | 198 | -4 |
| KG16C | 406.6 | 16.75 | 907.3 | 221 | -13 |
| K10H | 146.1 | 9.95 | 909.1 | 216 | -21 |
Industrial Mineral Oil
| Type | Kinematic Viscosity (40℃) mm²/s | Kinematic Viscosity (100℃) mm²/s | Density (20℃) kg/m³ | Flash Point ℃ | Pour Point ℃ |
|---|---|---|---|---|---|
| 3# | 2.88 | - | 821.6 | 110 | -30 |
| 5# | 4.22 | - | 833.2 | 106 | 0 |
| 7# | 6.991 | - | 833.4 | 142 | -30 |
| 10# | 9.999 | - | 832.9 | 162 | -20 |
| 15# | 14.38 | - | 893.5 | 152 | ＜-15 |
| 320# | 318 | - | 902.3 | 227 | -14 |
| KP680 | 688.7 | - | 886.3 | 278 | ＜-14 |
Base Oil
| Type | Kinematic Viscosity (40℃) mm²/s | Kinematic Viscosity (100℃) mm²/s | Density (20℃) kg/m³ | Flash Point ℃ | Pour Point ℃ |
|---|---|---|---|---|---|
| 60N | 10.42 | 2.742 | 829.6 | 188 | -37 |
| 150N | 31.38 | 5.594 | 845.1 | 228 | -17 |
| 150BS | 561.3 | 31.07 | 882.3 | 282 | -20 |
Cosmetics White Oil
| Type | Kinematic Viscosity (40℃) mm²/s | Kinematic Viscosity (100℃) mm²/s | Density (20℃) kg/m³ | Flash Point ℃ | Pour Point ℃ |
|---|---|---|---|---|---|
| 15# | 15.54 | 3.213 | 868.2 | 171 | <－40 |
| 26# | 25.5 | 4.321 | 864.7 | 178 | <－40 |
| 100# | 104.7 | 9.218 | 883.4 | 208 | <－26 |
Naphthenic Oil Types
Naphthenic Oil
Product Features
1. Low pour point and excellent low temperature fluidity, free of any coagulant.
2. Low aromatic residual, high naphthenic content and good solubility.
3. Stable carbon skeleton, reasonable hydrocarbon composition.
4. Deeply refined, good solubility with rubber.
Considerations
1. All containers, pipes and pumps that contacted with oil should be kept super clean, avoid mixing with any other oil products or impurities.
2. Storage & Preservation: It must be placed in cool and ventilated place. Insulation and moisture are prohibited.
Main Applications
KN Series is mainly used for the processing of rubber products that require photothermal stability. It is widely used as filling oil in synthetic rubber and operating oil in downstream rubber products industry. It plays the role of mutual dissolving with rubber, mixing soluble materials and softening rubber.
KNH Series are mainly used for processing the green environmental protection rubber products in high requirements of the thermal stability properties. Due to its extremely low aromatic hydrocarbon content, it is safe for manufacturing life daily rubber products. Also it plays the role of enhancing the mutual solubility of compound and rubber, helping to dissolve mixed materials, and softening rubber to increase elasticity.
KN4006
KN series products use low condensate naphthenic base crude oil as raw material, after atmospheric and vacuum distillation cut out appropriate fractions, via three sections of high pressure hydrogenation process. All of these make the product contains higher cycloparafin hydrocarbon content, extremely small aromatics content, color achieves over saybolt color number + 30. It is ideal for rubber products in high request for color and adhesive products.
Product Features
⦁ Low pour point and excellent low temperature fluidity, free of any coagulant
⦁ Low aromatic residual, high naphthenic content and good solubility
⦁ Stable carbon skeleton, reasonable hydrocarbon composition
⦁ Deeply refined, good solubility with rubber
| Analysis Items | Quality Index | Typical Data | Test Method |
|---|---|---|---|
| Appearance | Crystal Clear | Crystal Clear | Visual Test |
| Saybolt Color | 30 | 30 | ASTM D156 |
| Kinematic Viscosity (40℃), mm2/s | Report | 54.28 | ASTM D445 |
| Kinematic Viscosity (100℃), mm2/s | 5.0～7.0 | 6.242 | ASTM D445 |
| Density (20℃), kg/m3 | Report | 897.6 | ASTM D1298 |
| Flash Point, (Opening),℃ | ≮ 185 | 190 | ASTM D92 |
| Pour Point, ℃ | ≯－18 | -30 | ASTM D97 |
| Carbon Type Analysis, % CA | ≯ 1 | 0 | ASTM D189 |
| Carbon Type Analysis, %, CN | ≮ 40 | 55.1 | ASTM D189 |
| Carbon Type Analysis, %, CP | Report | 44.9 | ASTM D189 |
KN4010
KN series products use low condensate naphthenic base crude oil as raw material, after atmospheric and vacuum distillation cut out appropriate fractions, via three sections of high pressure hydrogenation process. All of these make the product contains higher cycloparafin hydrocarbon content, extremely small aromatics content, color achieves over saybolt color number + 30. It is ideal for rubber products in high request for color and adhesive products.
Product Features
⦁ Low pour point and excellent low temperature fluidity, free of any coagulant
⦁ Low aromatic residual, high naphthenic content and good solubility
⦁ Stable carbon skeleton, reasonable hydrocarbon composition
⦁ Deeply refined, good solubility with rubber
| Analysis Items | Quality Index | Typical Data | Test Method |
|---|---|---|---|
| Appearance | Crystal Clear | Crystal Clear | Visual Test |
| Saybolt Color | 30 | 30 | ASTM D156 |
| Kinematic Viscosity (40℃), mm2/s | Report | 172.9 | ASTM D445 |
| Kinematic Viscosity (100℃), mm2/s | 9.0～11.0 | 10.51 | ASTM D445 |
| Density (20℃), kg/m3 | Report | 901.4 | ASTM D1298 |
| Flash Point, (Opening),℃ | ≮ 200 | 218 | ASTM D92 |
| Pour Point, ℃ | ≯ -15 | -21 | ASTM D97 |
| Carbon Type Analysis, % CA | ≯ 1 | 0 | ASTM D189 |
| Carbon Type Analysis, %, CN | ≮ 40 | 52.1 | ASTM D189 |
| Carbon Type Analysis, %, CP | Report | 47.9 | ASTM D189 |
KNH4008
KNH series of products take low condensate naphthenic crude oil or paraffin base crude oil as raw material, after decompression distillation cut out the appropriate fraction, through the combination process of three stages of high pressure hydrogenation and aromatic saturation hydrogenation produces the final aim product.
Product Features
⦁ Low pour point and excellent low temperature fluidity, free of any coagulant
⦁ Low aromatic residual, high naphthenic content and good solubility
⦁ Stable carbon skeleton, reasonable hydrocarbon composition
⦁ Deeply refined, good solubility with rubber
| Analysis Items | Quality Index | Typical Data | Test Method |
|---|---|---|---|
| Appearance | Crystal Clear | Crystal Clear | Visual Test |
| Saybolt Color | 30 | 30 | ASTM D156 |
| Kinematic Viscosity (40℃), mm2/s | 90－110 | 104.7 | ASTM D445 |
| Kinematic Viscosity (100℃), mm2/s | Report | 9.218 | ASTM D445 |
| Density (20℃), kg/m3 | Report | 883.4 | ASTM D1298 |
| Flash Point, (Opening),℃ | ≮ 200 | 208 | ASTM D92 |
| Pour Point, ℃ | Report | ≮ -26 | ASTM D97 |
| Carbon Type Analysis, % CA | Report | 0 | ASTM D189 |
| Carbon Type Analysis, %, CN | Report | 49.1 | ASTM D189 |
| Carbon Type Analysis, %, CP | Report | 50.9 | ASTM D189 |
N4016
N series products use low condensate naphthenic base crude oil as raw material, after atmospheric and vacuum distillation cut out appropriate fractions, via three sections of high pressure hydrogenation process. All of these make the product contains higher cycloparafin hydrocarbon content, extremely small aromatics content, color achieves over saybolt color number + 30. It is ideal for rubber products in high request for color and adhesive products.
Product Features
⦁ Low pour point and excellent low temperature fluidity, free of any coagulant
⦁ Low aromatic residual, high naphthenic content and good solubility
⦁ Stable carbon skeleton, reasonable hydrocarbon composition
⦁ Deeply refined, good solubility with rubber
| Analysis Items | Quality Index | Typical Data | Test Method |
|---|---|---|---|
| Appearance | Crystal Clear | Crystal Clear | Visual Test |
| Saybolt Color | 30 | 30 | ASTM D156 |
| Kinematic Viscosity (40℃), mm2/s | Report | 406.6 | ASTM D445 |
| Kinematic Viscosity (100℃), mm2/s | 15~17 | 16.75 | ASTM D445 |
| Density (20℃), kg/m3 | Report | 907.3 | ASTM D1298 |
| Flash Point, (Opening),℃ | ≮ 210 | 221 | ASTM D92 |
| Pour Point, ℃ | ≯ -10 | -13 | ASTM D97 |
| Carbon Type Analysis, % CA | ≯ 1 | 0 | ASTM D189 |
| Carbon Type Analysis, %, CN | ≮ 40 | 48.2 | ASTM D189 |
| Carbon Type Analysis, %, CP | Report | 51.8 | ASTM D189 |
Common Rubber Oil Types
Common Rubber Oil
Product Features
1. Lower pour point and excellent low temperature fluidity, free of any coagulant
2. Low residual aromatic hydrocarbons, high naphthenic hydrocarbon content and appropriate solubility
3. Stable carbon skeleton, reasonable hydrocarbon composition
4. Deeply refined, good intermiscibility with rubber.
Considerations
1. All containers, pipes and pumps that contacted with oil should be kept super clean, avoid mixing with any other oil products or impurities.
2. Storage & Preservation: It must be placed in cool and ventilated place. Insulation and moisture are prohibited.
Main Applications
Mainly used for the processing of rubber products with low requirement for photothermal stability. Suitable for filling and processing oil of light color rubber products such as ethylene-propylene rubber, styrene rubber, chloroprene rubber and natural rubber.
KG06
The product takes low condensate naphthenic crude oil as the raw material, through the atmospheric vacuum distillation cutting out the appropriate fraction, via the high pressure hydrogenation device to refine and produce the ultimate aim product.
Product Features
⦁ Lower pour point and excellent low temperature fluidity, free of any coagulant
⦁ Low residual aromatic hydrocarbons, high naphthenic hydrocarbon content and appropriate solubility
⦁ Stable carbon skeleton, reasonable hydrocarbon composition
⦁ Deeply refined, good intermiscibility with rubber.
Product Considerations
⦁ All containers, pipes and pumps that contacted with oil should be kept super clean, avoid mixing with any other oil products or impurities
⦁ Storage & Preservation:It must be placed in cool and ventilated place. Insolation and moisture are prohibited.
| Analysis Items | Quality Index | Typical Data | Test Method |
|---|---|---|---|
| Appearance | Crystal Clear | Crystal Clear | Visual Test |
| Saybolt Color | 30 | 30 | ASTM D156 |
| Kinematic Viscosity (40℃), mm2/s ≯ | Report | 51.33 | ASTM D445 |
| Kinematic Viscosity (100℃), mm2/s ≯ | 5.0 ~ 7.0 | 5.643 | ASTM D445 |
| Condensation Point, ℃ ≯ | Report | -41 | ASTM D1133 |
| Pour Point ℃ | Report | -38 | ASTM D97 |
| Density (20℃), kg/m3 | Report | 879.6 | ASTM D1298 |
| Flash Point (Opening), ℃ | ≮ 180 | 190 | ASTM D92 |
KG12
The product takes low condensate naphthenic crude oil as the raw material, through the atmospheric vacuum distillation cutting out the appropriate fraction, via the high pressure hydrogenation device to refine and produce the ultimate aim product.
Product Features
⦁ Lower pour point and excellent low temperature fluidity, free of any coagulant
⦁ Low residual aromatic hydrocarbons, high naphthenic hydrocarbon content and appropriate solubility
⦁ Stable carbon skeleton, reasonable hydrocarbon composition
⦁ Deeply refined, good intermiscibility with rubber.
Product Considerations
⦁ All containers, pipes and pumps that contacted with oil should be kept super clean, avoid mixing with any other oil products or impurities
⦁ Storage & Preservation:It must be placed in cool and ventilated place. Insolation and moisture are prohibited.
| Analysis Items | Quality Index | Typical Data | Test Method |
|---|---|---|---|
| Appearance | Crystal Clear | Crystal Clear | Visual Test |
| Saybolt Color | 30 | 30 | ASTM D156 |
| Kinematic Viscosity (40℃), mm2/s ≯ | Report | 164.3 | ASTM D445 |
| Kinematic Viscosity (100℃), mm2/s ≯ | 9.0 ~ 12.0 | 10.52 | ASTM D445 |
| Condensation Point, ℃ ≯ | Report | -28 | ASTM D1133 |
| Pour Point ℃ | Report | -25 | ASTM D97 |
| Density (20℃), kg/m3 | Report | 915.4 | ASTM D1298 |
| Flash Point (Opening), ℃ | ≮ 201 | 226 | ASTM D92 |
K10B
The product takes low condensate naphthenic crude oil as the raw material, through the atmospheric vacuum distillation cutting out the appropriate fraction, via the high pressure hydrogenation device to refine and produce the ultimate aim product.
Product Features
⦁ Lower pour point and excellent low temperature fluidity, free of any coagulant
⦁ Low residual aromatic hydrocarbons, high naphthenic hydrocarbon content and appropriate solubility
⦁ Stable carbon skeleton, reasonable hydrocarbon composition
⦁ Deeply refined, good intermiscibility with rubber.
Product Considerations
⦁ All containers, pipes and pumps that contacted with oil should be kept super clean, avoid mixing with any other oil products or impurities
⦁ Storage & Preservation:It must be placed in cool and ventilated place. Insolation and moisture are prohibited.
| Analysis Items | Quality Index | Typical Data | Test Method |
|---|---|---|---|
| Appearance | Crystal Clear | Crystal Clear | Visual Test |
| Saybolt Color | Report | 22 | ASTM D156 |
| Kinematic Viscosity (40℃), mm2/s ≯ | Report | 188.46 | ASTM D445 |
| Kinematic Viscosity (100℃), mm2/s ≯ | 7.0 ~ 12.0 | 9.907 | ASTM D445 |
| Condensation Point, ℃ ≯ | Report | - | ASTM D1133 |
| Pour Point ℃ | Report | -4 | ASTM D97 |
| Density (20℃), kg/m3 | Report | 919.4 | ASTM D1298 |
| Flash Point (Opening), ℃ | ≮ 180 | 198 | ASTM D92 |
KG16C
The product takes low condensate naphthenic crude oil as the raw material, through the atmospheric vacuum distillation cutting out the appropriate fraction, via the high pressure hydrogenation device to refine and produce the ultimate aim product.
Product Features
⦁ Lower pour point and excellent low temperature fluidity, free of any coagulant
⦁ Low residual aromatic hydrocarbons, high naphthenic hydrocarbon content and appropriate solubility
⦁ Stable carbon skeleton, reasonable hydrocarbon composition
⦁ Deeply refined, good intermiscibility with rubber.
Product Considerations
⦁ All containers, pipes and pumps that contacted with oil should be kept super clean, avoid mixing with any other oil products or impurities
⦁ Storage & Preservation:It must be placed in cool and ventilated place. Insolation and moisture are prohibited.
| Analysis Items | Quality Index | Typical Data | Test Method |
|---|---|---|---|
| Appearance | Crystal Clear | Crystal Clear | Visual Test |
| Saybolt Color | ≮ +28 | 30 | ASTM D156 |
| Kinematic Viscosity (40℃), mm2/s ≯ | Report | 406.6 | ASTM D445 |
| Kinematic Viscosity (100℃), mm2/s ≯ | 15 ～ 17 | 16.75 | ASTM D445 |
| Condensation Point, ℃ ≯ | - | Report | ASTM D1133 |
| Pour Point ℃ | ≯ -10 | -13 | ASTM D97 |
| Density (20℃), kg/m3 | Report | 907.3 | ASTM D1298 |
| Flash Point (Opening), ℃ | ≮ 220 | 221 | ASTM D92 |
K10H
The product takes low condensate naphthenic crude oil as the raw material, through the atmospheric vacuum distillation cutting out the appropriate fraction, via the high pressure hydrogenation device to refine and produce the ultimate aim product.
Product Features
⦁ Lower pour point and excellent low temperature fluidity, free of any coagulant
⦁ Low residual aromatic hydrocarbons, high naphthenic hydrocarbon content and appropriate solubility
⦁ Stable carbon skeleton, reasonable hydrocarbon composition
⦁ Deeply refined, good intermiscibility with rubber.
Product Considerations
⦁ All containers, pipes and pumps that contacted with oil should be kept super clean, avoid mixing with any other oil products or impurities
⦁ Storage & Preservation:It must be placed in cool and ventilated place. Insolation and moisture are prohibited.
| Analysis Items | Quality Index | Typical Date | Test Method |
|---|---|---|---|
| Appearance | Crystal Clear | Crystal Clear | Visual Test |
| Saybolt Color | 30 | 30 | ASTM D156 |
| Kinematic Viscosity (40℃), mm2/s ≯ | ≮ 140 | 146.1 | ASTM D445 |
| Kinematic Viscosity (100℃), mm2/s ≯ | 9.0~11.0 | 9.95 | ASTM D445 |
| Condensation Point, ℃ ≯ | - | - | ASTM D1133 |
| Pour Point ℃ | ≯ -15 | -21 | ASTM D97 |
| Density (20℃), kg/m3 | ≮ 890 | 909.1 | ASTM D1298 |
| Flash Point (Opening), ℃ | ≮ 210 | 216 | ASTM D92 |
Industrial White Oil Types
Industrial White Oil
Product Features
1. Deep hydrogenation refined white oil, with extremely low smell
2. Low viscosity, excellent low temperature fluidity, high saturated hydrocarbon content, extremely low aromatic hydrocarbon content
3. Excellent water separation, electrical insulation and oxidation resistance
4. Good environmental performance
Considerations
1. All containers, pipes and pumps that contacted with oil should be kept super clean, avoid mixing with any other oil products or impurities.
2. Storage & Preservation: It must be placed in cool and ventilated place. Insulation and moisture are prohibited.
Main Applications
Mainly used in chemical fiber textile oil, rubber filling oil, metal processing oil, glass grease production and so on.
3#
The product takes crude oil as raw material, adopts atmospheric and vacuum distillation to cut out the appropriate fraction, via the high pressure hydrogenation combination process to produce the ultimate aim product.
Product Features
⦁ Deep hydrogenation refined white oil, with extremely low smell
⦁ Low viscosity, excellent low temperature fluidity, high saturated hydrocarbon content, extremely low aromatic hydrocarbon content
⦁ Excellent water separation, electrical insulation and oxidation resistance
⦁ Good environmental performance
Product Considerations
⦁ All containers, pipes and pumps that contacted with oil should be kept super clean, avoid mixing with any other oil products or impurities.
⦁ Storage & Preservation:It must be placed in cool and ventilated place. Insulation and moisture are prohibited.
| Analysis Items | Quality Index | Typical Data | Test Method |
|---|---|---|---|
| Appearance | Colorless, Odorless, Transparent Oily Liquid | Colorless, Odorless, Transparent Oily Liquid | Visual Test |
| Saybolt Color | 30 | 30 | ASTM D156 |
| Kinematic Viscosity (40℃), mm2/s ≯ | － | 2.88 | ASTM D445 |
| Density (20℃), kg/m3 | ≯ 840 | 821.6 | ASTM D1298 |
| Pour Point ℃ | － | -30 | ASTM D97 |
| Flash Point(Opening), ℃ | 100 | 100 | ASTM D92 |
| Water, % | None | None | ASTM D95 |
| Mechanical Impurities, % | None | None | ASTM D4807 |
| Water-Soluble Acid & Or Alkali | None | None | ASTM D1093 |
5#
The product takes crude oil as raw material, adopts atmospheric and vacuum distillation to cut out the appropriate fraction, via the high pressure hydrogenation combination process to produce the ultimate aim product.
Product Features
⦁ Deep hydrogenation refined white oil, with extremely low smell
⦁ Low viscosity, excellent low temperature fluidity, high saturated hydrocarbon content, extremely low aromatic hydrocarbon content
⦁ Excellent water separation, electrical insulation and oxidation resistance
⦁ Good environmental performance
Product Considerations
⦁ All containers, pipes and pumps that contacted with oil should be kept super clean, avoid mixing with any other oil products or impurities.
⦁ Storage & Preservation:It must be placed in cool and ventilated place. Insulation and moisture are prohibited.
| Analysis Items | Quality Index | Typical Data | Test Method |
|---|---|---|---|
| Appearance | Colorless, Odorless, Transparent oily liquid | Colorless, Odorless, Transparent oily liquid | Visual Test |
| Saybolt Color | 30 | 30 | ASTM D156 |
| Kinematic Viscosity (40℃), mm2/s ≯ | 3～6 | 4.22 | ASTM D445 |
| Density (20℃), kg/m3 | Report | 833.2 | ASTM D1298 |
| Pour Point ℃ | ≯ 3 | -15 | ASTM D97 |
| Flash Point(Opening), ℃ | 110 | 110 | ASTM D92 |
| Water, % | None | None | ASTM D95 |
| Mechanical Impurities, % | None | None | ASTM D4807 |
| Water-Soluble Acid & Or Alkali | None | None | ASTM D1093 |
7#
The product takes crude oil as raw material, adopts atmospheric and vacuum distillation to cut out the appropriate fraction, via the high pressure hydrogenation combination process to produce the ultimate aim product.
Product Features
⦁ Deep hydrogenation refined white oil, with extremely low smell
⦁ Low viscosity, excellent low temperature fluidity, high saturated hydrocarbon content, extremely low aromatic hydrocarbon content
⦁ Excellent water separation, electrical insulation and oxidation resistance
⦁ Good environmental performance
Product Considerations
⦁ All containers, pipes and pumps that contacted with oil should be kept super clean, avoid mixing with any other oil products or impurities.
⦁ Storage & Preservation:It must be placed in cool and ventilated place. Insulation and moisture are prohibited.
| Analysis Items | Quality Index | Typical Data | Test Method |
|---|---|---|---|
| Appearance | Colorless, Odorless, Transparent oily liquid | Colorless, Odorless, Transparent oily liquid | Visual Test |
| Saybolt Color | +30 | 30 | ASTM D156 |
| Kinematic Viscosity (40℃), mm2/s ≯ | ≯ 12 | 6.991 | ASTM D445 |
| Density (20℃), kg/m3 | ≯ 895 | 833.4 | ASTM D1298 |
| Pour Point ℃ | ≯ -7 | ＜ -30 | ASTM D97 |
| Flash Point(Opening), ℃ | 140 | 140 | ASTM D92 |
| Water, % | None | None | ASTM D95 |
| Mechanical Impurities, % | None | None | ASTM D4807 |
| Water-Soluble Acid & Or Alkali | None | None | ASTM D1093 |
10#
The product takes crude oil as raw material, adopts atmospheric and vacuum distillation to cut out the appropriate fraction, via the high pressure hydrogenation combination process to produce the ultimate aim product.
Product Features
⦁ Deep hydrogenation refined white oil, with extremely low smell
⦁ Low viscosity, excellent low temperature fluidity, high saturated hydrocarbon content, extremely low aromatic hydrocarbon content
⦁ Excellent water separation, electrical insulation and oxidation resistance
⦁ Good environmental performance
Product Considerations
⦁ All containers, pipes and pumps that contacted with oil should be kept super clean, avoid mixing with any other oil products or impurities.
⦁ Storage & Preservation:It must be placed in cool and ventilated place. Insulation and moisture are prohibited.
| Analysis Items | Quality Index | Typical Data | Test Method |
|---|---|---|---|
| Appearance | Colorless, Odorless, Transparent oily liquid | Colorless, Odorless, Transparent oily liquid | Visual Test |
| Saybolt Color | 30 | 30 | ASTM D156 |
| Kinematic Viscosity (40℃), mm2/s ≯ | 9～11 | 9.999 | ASTM D445 |
| Density (20℃), kg/m3 | Report | 832.9 | ASTM D1298 |
| Pour Point ℃ | ≯ 3 | ＜-20 | ASTM D97 |
| Flash Point(Opening), ℃ | ≮ 140 | 162 | ASTM D92 |
| Water, % | None | None | ASTM D95 |
| Mechanical Impurities, % | None | None | ASTM D4807 |
| Water-Soluble Acid & Or Alkali | None | None | ASTM D1093 |
15#
The product takes crude oil as raw material, adopts atmospheric and vacuum distillation to cut out the appropriate fraction, via the high pressure hydrogenation combination process to produce the ultimate aim product.
Product Features
⦁ Deep hydrogenation refined white oil, with extremely low smell
⦁ Low viscosity, excellent low temperature fluidity, high saturated hydrocarbon content, extremely low aromatic hydrocarbon content
⦁ Excellent water separation, electrical insulation and oxidation resistance
⦁ Good environmental performance
Product Considerations
⦁ All containers, pipes and pumps that contacted with oil should be kept super clean, avoid mixing with any other oil products or impurities.
⦁ Storage & Preservation:It must be placed in cool and ventilated place. Insulation and moisture are prohibited.
| Analysis Items | Quality Index | Typical Data | Test Method |
|---|---|---|---|
| Appearance | Colorless, Odorless, Transparent oily liquid | Colorless, Odorless, Transparent oily liquid | Visual Test |
| Saybolt Color | +30 | 30 | ASTM D156 |
| Kinematic Viscosity (40℃), mm2/s ≯ | 13.5~16.5 | 14.38 | ASTM D445 |
| Density (20℃), kg/m3 | Report | 893.5 | ASTM D1298 |
| Pour Point ℃ | ≯ -10 | ＜-15 | ASTM D97 |
| Flash Point(Opening), ℃ | ≮ 150 | 152 | ASTM D92 |
| Water, % | None | None | ASTM D95 |
| Mechanical Impurities, % | None | None | ASTM D4807 |
| Water-Soluble Acid & Or Alkali | None | None | ASTM D1093 |
320#
The product takes crude oil as raw material, adopts atmospheric and vacuum distillation to cut out the appropriate fraction, via the high pressure hydrogenation combination process to produce the ultimate aim product.
Product Features
⦁ Deep hydrogenation refined white oil, with extremely low smell
⦁ Low viscosity, excellent low temperature fluidity, high saturated hydrocarbon content, extremely low aromatic hydrocarbon content
⦁ Excellent water separation, electrical insulation and oxidation resistance
⦁ Good environmental performance
Product Considerations
⦁ All containers, pipes and pumps that contacted with oil should be kept super clean, avoid mixing with any other oil products or impurities.
⦁ Storage & Preservation:It must be placed in cool and ventilated place. Insulation and moisture are prohibited.
| Analysis Items | Quality Index | Typical Data | Test Method |
|---|---|---|---|
| Appearance | Colorless, Odorless, Transparent oily liquid | Colorless, Odorless, Transparent oily liquid | Visual Test |
| Saybolt Color | +30 | 30 | ASTM D156 |
| Kinematic Viscosity (40℃), mm2/s ≯ | 288-352 | 318 | ASTM D445 |
| Density (20℃), kg/m3 | Report | 902.3 | ASTM D1298 |
| Pour Point ℃ | ≯ -9 | -14 | ASTM D97 |
| Flash Point(Opening), ℃ | ≮ 215 | 227 | ASTM D92 |
| Water, % | None | None | ASTM D95 |
| Mechanical Impurities, % | None | None | ASTM D4807 |
| Water-Soluble Acid & Or Alkali | None | None | ASTM D1093 |
KP680
The product takes crude oil as raw material, adopts atmospheric and vacuum distillation to cut out the appropriate fraction, via the high pressure hydrogenation combination process to produce the ultimate aim product.
Product Features
⦁ Deep hydrogenation refined white oil, with extremely low smell
⦁ Low viscosity, excellent low temperature fluidity, high saturated hydrocarbon content, extremely low aromatic hydrocarbon content
⦁ Excellent water separation, electrical insulation and oxidation resistance
⦁ Good environmental performance
Product Considerations
⦁ All containers, pipes and pumps that contacted with oil should be kept super clean, avoid mixing with any other oil products or impurities.
⦁ Storage & Preservation:It must be placed in cool and ventilated place. Insulation and moisture are prohibited.
| Analysis Items | Quality Index | Typical Data | Test Method |
|---|---|---|---|
| Appearance | Colorless, Odorless, Transparent Oily Liquid | Colorless, Odorless, Transparent Oily Liquid | Visual Test |
| Seibert Color | 30 | 30 | ASTM D156 |
| Kinematic Viscosity (40℃), mm2/s ≯ | 612~748 | 688.7 | ASTM D445 |
| Density (20℃), kg/m3 | Report | 886.3 | ASTM D1298 |
| Pour Point ℃ | ≯ -9 | ＜-14 | ASTM D97 |
| Flash Point(Opening), ℃ | ≮ 260 | 278 | ASTM D92 |
| Water, % | None | None | ASTM D95 |
| Mechanical Impurities, % | None | None | ASTM D4807 |
| Water-Soluble Acid & Or Alkali | None | None | ASTM D1093 |
Base Oil Types
Base Oil
Product Features
60 N:
1. Deep hydrogenation product, high saturated hydrocarbon content, extremely low aromatic hydrocarbon and harmful impurity content.
2. Good low temperature fluidity and electrical insulation.
3. Good oxidation stability, excellent water separation and anti - emulsification performance.
150 N:
1. Deep hydrogenation product, high saturated hydrocarbon content, extremely low content of aromatic hydrocarbons and harmful impurities
2. High viscosity index, excellent low temperature fluidity and antioxidant stability
3. Good anti-yellowing and environmental protection performance
150 BS Bright Oil:
1. Low pour point and excellent low temperature fluidity, without any additives.
2. High viscosity, high flash point and high viscosity index.
3. Stable carbon skeleton, reasonable hydrocarbon composition.
4. Deeply refined, good solubility.
Considerations
1. All containers, pipes and pumps that contacted with oil should be kept super clean, avoid mixing with any other oil products or impurities.
2. Storage & Preservation: It must be placed in cool and ventilated place. Insulation and moisture are prohibited.
Main Applications
60N
Is mainly used for producing lubricant including industrial oil, sewing machine oil, automotive gas oil, cable oil and so on, it also applicable to TPR shoes and TPE.
150N
Is mainly used in industrial oil, automotive gas oil, special process oil and all kinds of lubricating oil, TPR sole material and TPE.
150BS
Bright oil is an ideal blend composition of various lubricants. Also suitable to a few rubber products with special requirements, such as automobile seals.
60N
The product is made from atomospheric vacuum distillate oil, through the integrated process of solvent refining & dewaxing & deasphalting, bleaching or hydrogenating supplement and high pressure hydrogenation.
Product Features
⦁ Deep hydrogenation product, high saturated hydrocarbon content, extremely low aromatic hydrocarbon and harmful impurity content.
⦁ Good low temperature fluidity and electrical insulation.
⦁ Good oxidation stability, excellent water separation and anti - emulsification performance.
| Analysis Items | Quality Index | Typical Data | Test Method |
|---|---|---|---|
| Appearance | Crystal Clear | Crystal Clear | Visual Test |
| Kinematic Viscosity (40℃), mm2/s | 8～13 | 10.42 | ASTM D445 |
| Kinematic Viscosity (100℃), mm2/s | Report | 2.742 | ASTM D445 |
| Viscosity Index | ≮ 100 | 103 | ASTM 2161 |
| Density, (20℃), kg/m3 | Report | 829.6 | ASTM D1298 |
| Flash Point (Opening) ℃ | ≮ 160.0 | 188 | ASTM D92 |
| Pour Point ℃ | ≯ -25 | -37 | ASTM D97 |
| Saybolt Color | 30 | 30 | ASTM D156 |
| Acid Value, mg(KOH)/g | ≯ 0.010 | ＜ 0.010 | ASTM D974 |
| Oxidation Stability (RBOT) 150℃min | ≮ 250 | 330 | ASTM D2272 |
| Saturated Hydrocarbon % (m/m） | ≮ 97 | ＞ 99.50 | ASTM D2007 |
| Sulphur Content, ug/g | Report | ＜ 1.0 | ASTM D2622 |
| Water% | None | None | ASTM D95 |
150N
The product is made from atomospheric vacuum distillate oil, through the integrated process of solvent refining & dewaxing & deasphalting, bleaching or hydrogenating supplement and high pressure hydrogenation.
Product Features
⦁ Deep hydrogenation product, high saturated hydrocarbon content, extremely low content of aromatic hydrocarbons and harmful impurities
⦁ High viscosity index, excellent low temperature fluidity and antioxidant stability
⦁ Good anti-yellowing and environmental protection performance
| Analysis Items | Quality Index | Typical Data | Test Method |
|---|---|---|---|
| Appearance | Crystal Clear | Crystal Clear | Visual Test |
| Kinematic Viscosity (40℃), mm2/s | 28～34 | 31.38 | ASTM D445 |
| Kinematic Viscosity (100℃), mm2/s | Report | 5.594 | ASTM D445 |
| Viscosity Index | ≮ 100 | 117 | ASTM 2161 |
| Density, (20℃), kg/m3 | Report | 845.1 | ASTM D1298 |
| Flash Point (Opening) ℃ | ≮ 210 | 228 | ASTM D92 |
| Pour Point ℃ | ≯－15 | -17 | ASTM D97 |
| Saybolt Color | 30 | 30 | ASTM D156 |
| Acid Value, mg(KOH)/g | ≯ 0.010 | ＜ 0.010 | ASTM D974 |
| Oxidation Stability (RBOT) 150℃min | ≮ 300 | 342 | ASTM D2272 |
| Saturated Hydrocarbon % (m/m） | ≮ 97 | ＞ 99.50 | ASTM D2007 |
| Sulphur Content, ug/g | Report | ＜ 1.0 | ASTM D2622 |
| Water% | None | None | ASTM D95 |
150BS
The product is made from atomospheric vacuum distillate oil, through the integrated process of solvent refining & dewaxing & deasphalting, bleaching or hydrogenating supplement and high pressure hydrogenation.
Product Features
⦁ Low pour point and excellent low temperature fluidity, without any additives.
⦁ High viscosity, high flash point and high viscosity index.
⦁ Stable carbon skeleton, reasonable hydrocarbon composition.
⦁Deeply refined, good solubility.
| Analysis Items | Quality Index | Typical Data | Test Method |
|---|---|---|---|
| Appearance | Crystal Clear | Crystal Clear | Visual Test |
| Kinematic Viscosity (40℃), mm2/s | Report | 561.3 | ASTM D445 |
| Kinematic Viscosity (100℃), mm2/s | 28.0~34.0 | 31.07 | ASTM D445 |
| Viscosity Index | ≮ 80 | 86 | ASTM 2161 |
| Density, (20℃), kg/m3 | Report | 882.3 | ASTM D1298 |
| Flash Point (Opening) ℃ | ≮ 270 | 282 | ASTM D92 |
| Pour Point ℃ | ≯ -9 | -20 | ASTM D97 |
| Saybolt Color | ≮ +26 | 30 | ASTM D156 |
| Acid Value, mg(KOH)/g | ≯ 0.02 | 0.0159 | ASTM D974 |
| Oxidation Stability (RBOT) 150℃min | ≮ 250 | ＞360 | ASTM D2272 |
| Saturated Hydrocarbon % (m/m） | ≮ 90 | 99.4 | ASTM D2007 |
| Sulphur Content, ug/g | Report | <10 | ASTM D2622 |
| Water% | None | None | ASTM D95 |
Cosmetic White Oil Types
Cosmetic White Oil
Product Features
1. The content of aromatic hydrocarbons is extremely low, and the polycyclic aromatic hydrocarbons are completely removed. The PCA content is in line with the European Union's environmental and health standards, which is safe and environmentally friendly
2. The product is rich in saturated circular carbon chain molecular structure, difficult to penetrate into the skin
3. Deeply refined, non-toxic and harmless, colorless and tasteless, with excellent photothermal stability
4. Low pour point and excellent low temperature fluidity, free of any coagulant, belong to the highly refined pure natural petroleum components
5. Stable carbon skeleton, reasonable hydrocarbon composition
6. High naphthenic hydrocarbon content and good solubility and yellow resistance
Considerations
1. All containers, pipes and pumps that contacted with oil should be kept super clean, avoid mixing with any other oil products or impurities.
2. Storage & Preservation: It must be placed in cool and ventilated place. Insulation and moisture are prohibited.
Main Applications
15#/26#/100#; mainly used as: Cosmetic industrial raw material, basic oil of ointment and softener, such as: hair cream, hair oil, lipstick, face oil, body oil, suntan oil, baby oil, cold cream. The processing oil of high grade rubber plastic products that in close contact with people (Thermoplastic elastomer: TPE, SEB, SEBS, TPU, TPV), The blend and production of lubricant and grease.
15#C
The product is made from low condensate naphthenic crude oil, which is cut into suitable fractions by atmospheric and vacuum distillation, and then produce the final product through the combination process of three-stage high-pressure hydrogenation and aromatic saturation hydrogenation
Product Features
⦁ The content of aromatic hydrocarbons is extremely low, and the polycyclic aromatic hydrocarbons are completely removed. The PCA content is in line with the European Union's environmental and health standards, which is safe and environmentally friendly
⦁ The product is rich in saturated circular carbon chain molecular structure, difficult to penetrate into the skin
⦁ Deeply refined, non-toxic and harmless, colorless and tasteless, with excellent photothermal stability
⦁ Low pour point and excellent low temperature fluidity, free of any coagulant, belong to the highly refined pure natural petroleum components
⦁ Stable carbon skeleton, reasonable hydrocarbon composition; High naphthenic hydrocarbon content and good solubility and yellow resistance
Product Considerations
⦁ All containers, pipes and pumps that contacted with oil should be kept super clean, avoid mixing with any other oil products or impurities.
⦁ Storage & Preservation: It must be placed in cool and ventilated place. Insulation and moisture are prohibited.
| Analysis Items | Quality Index | Typical Data | Test Method |
|---|---|---|---|
| Density (20℃) ,kg/m3 | Report | 868.2 | ASTM D1298 |
| Kinematic Viscosity (40℃), mm2/s | 12.5－17.5 | 15.54 | ASTM D445 |
| Kinematic Viscosity (100℃), mm2/s | Report | 3.213 | ASTM D445 |
| Flash Point (Opening) | ≮ 150 | 171 | ASTM D92 |
| Pour Point ℃ | Report | <-40 | ASTM D97 |
| Average Relative Molecular Weight | Report | 304 | ASTM D2504 |
| Arsenic, mg/kg | ≯ 1 | <1.0 | ASTM D6440 |
| Plumbum, mg/kg | ≯ 1 | <1.0 | ASTM D5059 |
| Heavy Metal, mg/kg | Report | <10 | ASTM D4294 |
| Seibert Color | ≯ +30 | 30 | ASTM D156 |
| Readily Carbonizable Substance | Pass | Pass | ASTM D525 |
| Solid Paraffin | Pass | Pass | ASTM D97 |
| Polycyclic Aromatic Hydrocarbon, Ultraviolet Absorbancy Degree, cm (260-420 nm) | Report | 0.0783 | ASTM D5580 |
100#
The product is made from low condensate naphthenic crude oil, which is cut into suitable fractions by atmospheric and vacuum distillation, and then produce the final product through the combination process of three-stage high-pressure hydrogenation and aromatic saturation hydrogenation
Product Features
⦁ The content of aromatic hydrocarbons is extremely low, and the polycyclic aromatic hydrocarbons are completely removed. The PCA content is in line with the European Union's environmental and health standards, which is safe and environmentally friendly
⦁ The product is rich in saturated circular carbon chain molecular structure, difficult to penetrate into the skin
⦁ Deeply refined, non-toxic and harmless, colorless and tasteless, with excellent photothermal stability
⦁ Low pour point and excellent low temperature fluidity, free of any coagulant, belong to the highly refined pure natural petroleum components
⦁ Stable carbon skeleton, reasonable hydrocarbon composition; High naphthenic hydrocarbon content and good solubility and yellow resistance
Product Considerations
⦁ All containers, pipes and pumps that contacted with oil should be kept super clean, avoid mixing with any other oil products or impurities.
⦁ Storage & Preservation: It must be placed in cool and ventilated place. Insulation and moisture are prohibited.
| Analysis Items | Quality Index | Typical Data | Test Method |
|---|---|---|---|
| Density (20℃) ,kg/m3 | Report | 883.4 | ASTM D1298 |
| Kinematic Viscosity (40℃), mm2/s | 90－110 | 104.7 | ASTM D445 |
| Kinematic Viscosity (100℃), mm2/s | Report | 9.218 | ASTM D445 |
| Flash Point (Opening) | ≮ 200 | 208 | ASTM D92 |
| Pour Point ℃ | Report | < -26 | ASTM D97 |
| Average Relative Molecular Weight | Report | 415 | ASTM D2504 |
| Arsenic, mg/kg | ≯ 1 | < 1.0 | ASTM D6440 |
| Plumbum, mg/kg | ≯ 1 | < 1.0 | ASTM D5059 |
| Heavy Metal, mg/kg | Report | < 10 | ASTM D4294 |
| Seibert Color | ≯ + 30 | 30 | ASTM D156 |
| Readily Carbonizable Substance | Pass | Pass | ASTM D525 |
| Solid Paraffin | Pass | Pass | ASTM D97 |
| Polycyclic Aromatic Hydrocarbon, Ultraviolet Absorbancy Degree, cm (260-420 nm) | Report | 0.0905 | ASTM D5580 |
Every Drop of Crystalline Oil, a Promise of Success for You
